品牌列表

Portable Ozone Analyzer
- Proven UV Absorption bench used in our popular line of Industrial Ozone products.
- Highest quality of construction.
- Rugged and lightweight ABS polycarbonate chassis with handle.
- Well suited for portable, low power monitoring applications.
- Wide operating range.
SO2 Gas Analyzer
- US EPA Federal Reference Certification
- Applicable for manifold and mobile cart
- Advanced color touch panel
Gas Filter Correlation CO Analyzer
- US EPA Federal Reference Certification
- The signal proportional to concentration, with little effect from interfering gases within the sample
- Advanced color touch panel
O3 Gas Analyzer
- US EPA Federal Reference certification
- High-precision ozone analyzer
- Advanced color touch panel
- Applicable for manifold and mobile cart
Ambient Hydrocarbon Gas Analyzer
- Fast Response, Low Detection Limit
- Intuitive User Interface
- Sample Particulate Filter
- Automatic Baseline, Dedicated Graphical Calibration Screen
Total Sulfur (TS) Gas Analyzer
- Applicable for manifold and mobile cart
- Advanced color touch panel
Dynamic Dilution Calibrator
- Dilution corrector for ppb or ppt grade
- 4 sets of calibration gas inlets, 1 set of diluted zero air inlets
- Dilution correction ratio can reach 200 times or more
- Can set on-site QA / QC calibration or remote calibration
- Calibration with trace gas analyzer
Portable Zero Air System
- Zero air generator that can be taken to various sites for school tour
- Dew point temperature indicating device
- Long-acting SO2 / NO / NO2 / O3 / H2S / NH3 remover
- Long-life scrubber
- Provide pure zero air for dilution calibration
PM Mass Monitor
- Continuous, real-time PM10 and PM2.5 mass concentration results
- Simple set-up and 10-minute warm up time
- Superior measurement sensitivity and precision
- Long autonomy and low power consumption
- Low maintenance and cost of operation
- US EPA-approved
NO/NO2/NOx Analyzer
- US EPA Federal Reference Certification
- With state-of-the-art electronics to allow accurate and dependable low level measurements
- Applicable for manifold and mobile cart
- Advanced color touch panel
CAPS True NO2- NOx- NO Analyzer
- Ranges: 0 5 ppb up to 1 ppm
- Lower Detectable Limit: < 0.1 ppb
- Zero Drift: < 0.2 ppb/24 hrs
- Span Drift: < 0.5% of reading/24 hrs
- Response Time: < 58 seconds to 95%
- Linearity: 1% of full scale
- Precision: 0.5% of reading above 5 ppb
- Sample Flow: 1000 cc/min
- Power Consumption: 110W; 100 250VAC (50 60Hz)
Chemiluminescence NH3 Analyzer
- US EPA Federal Reference Certification
- Independent ranges for NH3, NO, NO2, NOx
- Stable and repeatable NH3 measurements at very low levels.
- The remarkable stability by means of an AutoZero valve which measures and corrects for zero noise.
- Advanced color touch panel
UV Fluorescence (H2S) Analyzer
- Ranges: 0-50 ppb to 0-10 ppm H2S and up to 20 ppm SO2, user selectable
- Independent ranges and auto ranging
- Large, vivid, and durable color graphics display with touch screen interface
- Ethernet, RS-232, and (optional) USB com ports
- Front panel USB connections for peripheral devices and firmware upgrades
- 8 analog inputs (optional)
- Adaptive signal filtering optimizes response time
- Temperature & pressure compensation
- Auto zero system
- Comprehensive internal data logging with programmable averaging periods
- Ability to log virtually any operating parameter
O3 Gas Analyzer
- Ultraviolet absorption analyzer uses Low's law to measure low concentration of ozone in ambient air
- Advanced color touch panel
- Applicable for manifold and mobile cart
Zero Air System
- Zero air generator that can be taken to various sites for school tour
- Dew point temperature indicating device
- Long-acting SO2 / NO / NO2 / O3 / H2S / NH3 remover
- Long-life scrubber
- Provide pure zero air for dilution calibration
Portable Gas Calibrator
- Dilution corrector for ppb or ppt grade
- 4 sets of calibration gas inlet, 1 set of diluted zero air inlet
- Dilution correction ratio can reach 200 times or more
- Can set on-site QA / QC calibration or remote calibration
- Calibration with trace gas analyzer